Many productions call for the absolute best lenses possible and end up reaching for Zeiss Master Primes or Panavision Primos for a well corrected, clinical look. This is great if you want an absolutely clean slate to work with in post since it’s always easier to dial down sharpness and add a bit of grunge after the fact. But what if you want something with a little more character – a little bit of flare, in camera. Continue reading “Duclos Lenses Introduces Rokinon•Raw Primes”→
This post is part of a series of upcoming reviews of camera-lens mounts and their pros and cons. Quite possibly the most common camera-lens mount on the market today is the Canon EF and EF-S mount. Introduced in 1987 and updated in 2003, the EF-S mount added several features that improved on the original FD Mount including focus motors placed inside the lens to enable auto-focus. Step forward 2.5 decades and the Canon EF and EF-S mount are the reigning champion of still photography and quickly gaining popularity in the world of cinema. For the sake of simplicity, I’ll simply refer to the Canon mount as EF instead of EF or EF-S. If you need more clarification on the difference between EF and EF-S, google it. 😉
Sony is just starting to roll out their anticipated F3 camera. A Super 35 sized sensor in a mall, lightweight package. I try to stick to knowing a lot about lenses so you can hear more about the camera from Jason Wingrove’s real world take. But I will tell you all about your lens options when shooting with an F3. I’ll start with the most logical…
The camera comes with a PL mount. PL mount is the standard mount used by just about every non-panavision camera in the motion picture industry. This means that you have a slew of premium cinema lenses at your disposal and that’s how it should be. However, if you are on a budget and can’t afford an Angenieux 24-290mm Optimo then there are a few other options available. I know there are quite a few people making the jump to an F3 from a DSLR like a 5D MkII or a 7D and probably have some Nikon lenses or Leica lenses that you adapted to use on your Canon. Those are still great lenses and will perform just fine on an F3. Of course this is all under the assumption that real cine lenses aren’t an option. I want to make sure that is very clear from the beginning. There is no replacement for cine lenses like Zeiss, Angenieux, Cooke, etc. But there are many options out there for alternative lenses. A favorite of the DSLR revolution has been the Zeiss ZF lenses. They use great glass with advanced coatings and fully manual mechanics. If you don’t know why these still lenses are well suited for motion picture, read through Still Vs. Cine. Your set of Zeiss ZF lenses is sitting around gathering dust because you purchased a PL mount camera. No worries. There is a company called MTF Services that is making a kit to change your F3 to Nikon mount. I haven’t dealt with them personally but the mount looks decent. Now you can use your Zeiss ZF lenses as well as any other Nikon mount lens in your arsenal. The other common route the DSLR community has chosen is Leica’s R series lenses. The selection of prime lenses is great and the glass is simply stunning. Unfortunately there isn’t a Leica mount available for the F3 as far as I know. But there is a Leica to Nikon adaptor for Leica lenses that would solve the problem with the same kit from MTF Services. Yes, you’re converting your Leica mount to Nikon and your Sony mount to Nikon but everything is solid and as long as you take care of your equipment and have it checked frequently, you should be able to maintain the proper flange depth. The benefit to using still photo lenses with a camera like the Sony F3 is their size and weight. There are usually two major components on a hand held rig; the camera and the lens… The Sony F3 is already light enough for what it is. Choosing an appropriate lens makes all the difference in portability and ease of use. If you want to ditch the stills lenses and go for the more professional application, take a look at other sets of prime lenses.
Cooke recently released their Cooke Panchros, a throwback to their original Cooke Speed Panchros that were very common back in the 1930’s and are still well known today. Cooke went on to make other great lenses like the S-4s and now the 5is. These were top notch cinema lenses. But they left behind all of the smaller productions that couldn’t afford a set of premium lenses. They filled the gap with their new Panchro lenses. A bit slow in the aperture at T2.8 but acceptable to say the least. The whole set is matched in speed and color reproduction. Small and compact compared to todays standards, the Panchros should do just fine for almost any application other than low-light. If you’re thinking about using Cooke Panchros but think they will be too slow because of low light, then your grip dept. isn’t doing their job.
You might be asking “What about the PL mount primes that Canon is offering with the camera?”… Sony is offering three PL mount prime lenses (35,50,85mm) for an additional $6,500 (I think) that would work just fine on the F3. I haven’t had a chance to formally test these Sony primes but I’ve handled and used the 35mm on an F3 and I believe they will leave a lot to be desired for professionals. Think of it as the kit lens that comes with a DSRL. It gets the job done… But you can do better. I’ll reserve my final judgment for when I can put the Sony PL lenses through their paces and see what they can really do in a proper test environment as well as real work application. Who knows, they may surprise me. I can go on and on about all the cool PL mount primes you can now use with a Sony F3 but that would take several pages of writing that I simply don’t have the will to write. I’ll finish by going over one other option that I think suits the Sony F3 very well.
Angenieux makes an excellent line of lenses they call Optimo. This line includes their amazing 24-290mm, 17-80mm, 28-76mm, and 15-40mm. All of these lenses set the standard for cinema zooms over the past decade and truly are works of art. Angenieux set the bar so high they left the little guys at the bottom and needed to do something to put their glass in the hands of the creative newcomers. Along came their Rouge series. Originally aimed at those using a RED camera since they were digital only lenses. This meant they can’t be used on a reflex mirror camera since the rear element sticks too far into the camera body. The Rouge series consists of two lenses that are direct descendants of their Optimo parents, the 30-80mm and the 16-42mm. Distinguished by their protruding rear element and signature red rubber grips, the Rouge lenses perform just as well as their pricier counterparts, at a fraction of the cost. A good option, maybe one of the best options for a lightweight, professional cinema zoom lens… In the world.
I receive dozens of emails everyday and I want to respond to them all but sometimes it just isn’t possible. I’m not a trade secret kind of guy. I like to spread knowledge and educate as many people as I can. So here is a quick little FAQ in regards to lens modification and a few other common questions I am asked… Frequently.
EDIT: THIS POST IS OUTDATED AND MAY NO LONGER BE ACCURATE. PLEASE CONTACT DUCLOS LENSES FOR CURRENT INFO
1) What lenses work well for motion picture?
2) I have a bunch of still lenses. Can they be converted to work for cinema?
3) What is a Cine-Mod?
4) Can my lens be Cine-Modded?
5) What lenses are well suited for a Cine-Mod?
6) Can the mount on my lens be changed?
7) I have Nikon lenses. Can the focus be reversed?
8] The focus throw of my still lenses is short, can it be expanded?
9) Can lens breathing be corrected?
10) Can my lens be re-housed for cinema use? What is the cost?